Product Description10 Amp 12/24 Volt PWM Solar Charge Controller w/ LCD Screen
This charge controller is intelligent, using MCU and professional software to control charging, prolonging the batteries’ life. Use the load timer to run our solar grid tie inverters during peak hours right from your batteries and or solar panels. Set the on and off time to run it as long as you want. Peak hours are when the electric company charges you almost twice as much to use your electricity. This is usually between 11-3 pm in the summer and 5-10 pm in the winter! The controller has two battery input terminals, two solar panel input terminals, and two load terminals. The load terminals are for running various dc loads like lights or our solar grid tie inverters. It has full self protection, protection of overload, short circuit, reverse connection, over charging and over discharging, etc. Dimensions: 6.5 inches x 4 inches x 1.5 inches / 370 mm x 340 mm x 230 mm Rated Cable Charging Current: 10 Amps Rated Load Current: 10 Amps System Voltage: 12 volts and 24 volts Overload, Short Circuit Protection: YES No load current: ?20 mA Charging Circuit Voltage Drop: Not more than 0.26 Volts Discharging Circuit Voltage Drop: Not more than 0.15 Volts Working Temperature: -20?~40? DC Charge Voltage: 14.4 Volts and 28.8 Volts Float Charging: 13.7 Volts and 27.4 Volts Temperature Compensation: -5mv/?/2V Automatic Disconnection Output Voltage: 10.5 Volts or 21 Volts Control Method: Charging batteries with PWM (pulse width modulation) Operating Temperature Range: -20°C to 40°C Storage temperature range: -20°C to 50°CWe can provide you our best price!